MajenkoProjects/decdoctex
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Improved figure and table management routines

Browse Source
This commit is contained in:
Matt Jenkins
2025-03-25 23:51:31 +00:00
parent 9d6b1bc5b9
commit 9305afd87e
11 changed files with 462 additions and 101 deletions
Download Patch File Download Diff File Expand all files Collapse all files

BIN
EK-VAXAA-4P-001.pdf
View File

Binary file not shown.

45
EK-VAXAA-4P-001.tex
View File

@@ -102,7 +102,7 @@ coprocessor to display gray-scale on your screen, you will need to install a
color video cable assembly on your monitor. color video cable assembly on your monitor.
First, locate the video cable assembly shown in \figref{1} (part no. BC19S). First, locate the video cable assembly shown in \figref{1} (part no. BC19S).
\fig{1}{MLO-1263-87}{Color Video Cable Assembly, BC19S} \fig{MLO-1263-87}{Color Video Cable Assembly, BC19S}
The following sections describe the installation process for the VR260 and The following sections describe the installation process for the VR260 and
VR150 respectively. VR150 respectively.
@@ -118,14 +118,14 @@ VR150 respectively.
\textbf{Note: The R and B connectors will hang freely — do not connect \textbf{Note: The R and B connectors will hang freely — do not connect
them to anything.} them to anything.}
\fig{2}{MLO-1269-87}{Connecting G Cable Connector, VR260 Monochrome Monitor} \fig{MLO-1269-87}{Connecting G Cable Connector, VR260 Monochrome Monitor}
\item Locate the shorter of the two knobs that come with the color video cable. \item Locate the shorter of the two knobs that come with the color video cable.
\item Insert the shorter knob into the color video cable assembly. \item Insert the shorter knob into the color video cable assembly.
\item Turn the knob on the video cable assembly clockwise to secure it to the \item Turn the knob on the video cable assembly clockwise to secure it to the
monitor (\figref{3}). monitor (\figref{3}).
\fig{3}{MLO-1270-87}{Video Cable Assembly Knob} \fig{MLO-1270-87}{Video Cable Assembly Knob}
\end{enumerate} \end{enumerate}
@@ -138,7 +138,7 @@ monitor (\figref{3}).
\item Insert the shorter knob into the color video cable assembly. \item Insert the shorter knob into the color video cable assembly.
\item Turn the knob on the video cable assembly clockwise to secure it to the monitor (\figref{3}). \item Turn the knob on the video cable assembly clockwise to secure it to the monitor (\figref{3}).
\item Screw the video cable assembly into the cable mounting plate (\figref{4}). \item Screw the video cable assembly into the cable mounting plate (\figref{4}).
\fig{4}{MLO-1306-87}{Mounting Video Cable Assembly on VR150 Monitor, Color Cable} \fig{MLO-1306-87}{Mounting Video Cable Assembly on VR150 Monitor, Color Cable}
\textbf{Caution: Failure to secure the video cable assembly to the cable \textbf{Caution: Failure to secure the video cable assembly to the cable
mounting plate may strain the cable and may also cause radio mounting plate may strain the cable and may also cause radio
emissions in excess of FCC guidelines.} emissions in excess of FCC guidelines.}
@@ -149,7 +149,7 @@ emissions in excess of FCC guidelines.}
\textbf{Note: The R and B connectors will hang freely — do not connect them \textbf{Note: The R and B connectors will hang freely — do not connect them
to anything.} to anything.}
\fig{5}{MLO-1279-87}{Connecting G Cable Connector, VR150 Monitor} \fig{MLO-1279-87}{Connecting G Cable Connector, VR150 Monitor}
\usection{Connecting the Monitor Cable to the System Unit} \usection{Connecting the Monitor Cable to the System Unit}
Use the color video cable assembly (part no. BC19S) to connect your monitor Use the color video cable assembly (part no. BC19S) to connect your monitor
@@ -166,7 +166,7 @@ the drive door.}
off. off.
\item Lift up the cable-restraining bar on the rear of the VAXstation 2000 System \item Lift up the cable-restraining bar on the rear of the VAXstation 2000 System
unit (\figref{6}). unit (\figref{6}).
\fig{6}{MLO-2116-87}{Connecting the Monitor Cable to the System Unit} \fig{MLO-2116-87}{Connecting the Monitor Cable to the System Unit}
\textbf{Note: If you plan to connect the printer and modern cables, leave the \textbf{Note: If you plan to connect the printer and modern cables, leave the
cable-restraining bar up until you have connected those options.} cable-restraining bar up until you have connected those options.}
\item Connect the end of the BC19S video cable to the video port on the rear \item Connect the end of the BC19S video cable to the video port on the rear
@@ -179,7 +179,7 @@ clockwise with your hngers (\figref{7}).
\end{enumerate} \end{enumerate}
\textbf{Caution: Before connecting the monitor cable to the System, make sure \textbf{Caution: Before connecting the monitor cable to the System, make sure
the system's power supply is turned off.} the system's power supply is turned off.}
\fig{7}{MLO-2117-87}{Tightening the Thumbscrews on the Monitor Cable} \fig{MLO-2117-87}{Tightening the Thumbscrews on the Monitor Cable}
\usection{Testing Your System} \usection{Testing Your System}
@@ -211,28 +211,18 @@ and/or other failures. Check the LEDs on your keyboard for secondary
power-up error messages. If any of the LEDs in \tabref{1} are lit, call your power-up error messages. If any of the LEDs in \tabref{1} are lit, call your
service representative.} service representative.}
\begin{table}[H] \begin{tbl}{Power-Up Error Messages}{l l}
\label{table:1}
\caption{Power-Up Error Messages}
\begin{tabularx}{\textwidth}{l l}
\hline
\textbf{If} & \textbf{Then there is a}\\ \textbf{If} & \textbf{Then there is a}\\
\hline \hline
The Hold Screen keyboard LED is lit & System failure\\ The Hold Screen keyboard LED is lit & System failure\\
The Lock keyboard LED is lit & Video board failure \\ The Lock keyboard LED is lit & Video board failure \\
The Compose keyboard LED is lit & Communication option failure\\ The Compose keyboard LED is lit & Communication option failure\\
\hline \end{tbl}
\end{tabularx}
\end{table}
\usubsection{TEST 50 Mnemonics} \usubsection{TEST 50 Mnemonics}
When you run TEST 50, information about the system is displayed using the mnemonics listed in \tabref{2}. When you run TEST 50, information about the system is displayed using the mnemonics listed in \tabref{2}.
\begin{table}[H] \begin{tbl}{Definitions of TEST 50 Mnemonics}{l l}
\label{table:2}
\caption{Definitions of TEST 50 Mnemonics}
\begin{tabularx}{\textwidth}{l l}
\hline
\textbf{Mnemonic} & \textbf{Device}\\ \textbf{Mnemonic} & \textbf{Device}\\
\hline \hline
CLK & System clock \\ CLK & System clock \\
@@ -247,9 +237,7 @@ MONO & Monochrome video circuits on system module \\
NVR & Nonvolatile RAM \\ NVR & Nonvolatile RAM \\
SYS & Interrupt controller and Ethernet ID ROM \\ SYS & Interrupt controller and Ethernet ID ROM \\
TPC & Tape controller \\ TPC & Tape controller \\
\hline \end{tbl}
\end{tabularx}
\end{table}
The HDC mnemonic represents the disk Controller. The first group of numbers The HDC mnemonic represents the disk Controller. The first group of numbers
after the HDC line in the screen display teils you what type of device is after the HDC line in the screen display teils you what type of device is
@@ -291,7 +279,7 @@ Type \textbf{TEST 87} and press Return.
The monitor display eight color bars (\figref{8}). The monitor display eight color bars (\figref{8}).
\end{enumerate} \end{enumerate}
\fig{8}{MLO-1312-87}{Color Bars} \fig{MLO-1312-87}{Color Bars}
\usubsubsection{Gray-Scale Patterns} \usubsubsection{Gray-Scale Patterns}
@@ -333,11 +321,7 @@ See your Software documentation for more information.
A list of all TEST commands and the tests or Utility programs they execute A list of all TEST commands and the tests or Utility programs they execute
is shown in \tabref{3}. is shown in \tabref{3}.
\begin{table}[H] \begin{tbl}{Summary of TEST Commands}{l l}
\caption{Summary of TEST Commands}
\label{table:3}
\begin{tabularx}{\textwidth}{l l}
\hline
\textbf{Command} & \textbf{Test or Utility Program}\\ \textbf{Command} & \textbf{Test or Utility Program}\\
\hline \hline
TEST 0 & System exersizer \\ TEST 0 & System exersizer \\
@@ -353,8 +337,7 @@ TEST 81 & Screen of Es (color monitor) \\
TEST 82 & White screen (color monitor) \\ TEST 82 & White screen (color monitor) \\
TEST 87 & IEight color bars (color monitor) \\ TEST 87 & IEight color bars (color monitor) \\
TEST 88 & Eight gray-scale bars (color or monochrome monitor) \\ TEST 88 & Eight gray-scale bars (color or monochrome monitor) \\
\end{tabularx} \end{tbl}
\end{table}
\howtoorder \howtoorder

16
EK-VSTAA-MG-001-ch1.tex
View File

@@ -32,7 +32,7 @@ the medallion next to the power switch on the front, the DEC423 converter
on the back, or the system jumper position on the system module inside on the back, or the system jumper position on the system module inside
the box. the box.
\fig{1-1}{MA-0063-87}{Front View of the VAXstation 2000 and MicroVAX 2000 Systems} \fig{MA-0063-87}{Front View of the VAXstation 2000 and MicroVAX 2000 Systems}
\newpage \newpage
\figref{1-2} shows the rear view of the VAXstation 2000 and labels each \figref{1-2} shows the rear view of the VAXstation 2000 and labels each
@@ -42,7 +42,7 @@ communication port. A VR260 monochrome monitor can be connected to the
ThinWire Ethernet port Supports IEEE 802.3 (Standard Ethernet) network ThinWire Ethernet port Supports IEEE 802.3 (Standard Ethernet) network
communications connections over the ThinWire Ethernet cable. communications connections over the ThinWire Ethernet cable.
\fig{1-2}{MA-0132-87}{Rear View of the VAXstation 2000 System} \fig{MA-0132-87}{Rear View of the VAXstation 2000 System}
\newpage \newpage
@@ -61,7 +61,7 @@ or a printer. The ThinWire Ethernet port supports IEEE 802.3 (Standard
Ethernet) network communications connections over the ThinWire Ethernet Ethernet) network communications connections over the ThinWire Ethernet
cable. cable.
\fig{1-3}{MA-0134-87}{Rear View of the MicroVAX 2000 System} \fig{MA-0134-87}{Rear View of the MicroVAX 2000 System}
\section{Mass Storage Expansion Box for Both Systems} \section{Mass Storage Expansion Box for Both Systems}
@@ -74,11 +74,11 @@ The tape drive expansion box contains a TK50 tape drive and a controller
board. Each expansion box contains a power supply, a resistor load board board. Each expansion box contains a power supply, a resistor load board
(to regulate the power supply), and the drive. (to regulate the power supply), and the drive.
\fig{1-4}{MA-0065-87}{Front View of the Hard Disk Expansion Box} \fig{MA-0065-87}{Front View of the Hard Disk Expansion Box}
\newpage \newpage
\fig{1-5}{MA-0064-87}{Front View of the Tape Drive Expansion Box} \fig{MA-0064-87}{Front View of the Tape Drive Expansion Box}
\newpage \newpage
@@ -90,7 +90,7 @@ disk expansion box to the system. Port C is reserved for future options.
\figref{1-6} shows the back of a MicroVAX 2000 system box with an expansion \figref{1-6} shows the back of a MicroVAX 2000 system box with an expansion
adapter. adapter.
\fig{1-6}{MA-0135-87}{System Box with Expansion Adapter} \fig{MA-0135-87}{System Box with Expansion Adapter}
\newpage \newpage
@@ -115,9 +115,9 @@ connected to the system module through two 40-conductor cables.
\figref{1-7} shows the locations of the FRUs in the system box. \figref{1-8} \figref{1-7} shows the locations of the FRUs in the system box. \figref{1-8}
shows the locations of the FRUs in the expansion boxes. shows the locations of the FRUs in the expansion boxes.
\fig{1-7}{MA-0150-87}{FRU Locations in the System Box} \fig{MA-0150-87}{FRU Locations in the System Box}
\newpage \newpage
\fig{1-8}{MA-0133-87}{FRU Locations in the Expansion Boxes} \fig{MA-0133-87}{FRU Locations in the Expansion Boxes}

423
EK-VSTAA-MG-001-ch2.tex
View File

@@ -35,7 +35,7 @@ mode of operation each prompt represents.
\newpage \newpage
\begin{tbl}{2-1}{Prompts}{c l} \begin{tbl}{Prompts}{c l}
\textbf{Prompt} & \textbf{Mode of operation}\\ \textbf{Prompt} & \textbf{Mode of operation}\\
\hline \hline
{>}{>}{>} & Console mode. Console commands are listed in \hyperlink{appendix.b}{Appendix B}. \\ {>}{>}{>} & Console mode. Console commands are listed in \hyperlink{appendix.b}{Appendix B}. \\
@@ -84,8 +84,8 @@ default recovery actions.
\item For a boot failure -- If the system fails to boot properly, the system \item For a boot failure -- If the system fails to boot properly, the system
automatically halts the CPU and enters console mode. See Section 2.5.2 automatically halts the CPU and enters console mode. See Section 2.5.2
for information on setting the default boot device. for information on setting the default boot device.
\item On a system error -- If the CPU detects a severe corruption of its oper- \item On a system error -- If the CPU detects a severe corruption of its
ating environment, it halts and reads the default recovery action in the operating environment, it halts and reads the default recovery action in the
NVR. The default recovery action can be restart, boot, or halt. When NVR. The default recovery action can be restart, boot, or halt. When
it is restart and the restart fails, then the system automatically tries to it is restart and the restart fails, then the system automatically tries to
boot the operating system software. If the boot fails, the CPU halts and boot the operating system software. If the boot fails, the CPU halts and
@@ -114,8 +114,8 @@ another node, the system keeps looking for the software indefinitely.
If a boot message for the operating system software does not appear If a boot message for the operating system software does not appear
shortly after the Ethernet boot message (ESA0) is displayed, then you shortly after the Ethernet boot message (ESA0) is displayed, then you
must press the halt button to abort the Ethernet boot. If you still need must press the halt button to abort the Ethernet boot. If you still need
to boot over the Ethernet, make sure the node with the operating sys- to boot over the Ethernet, make sure the node with the operating system
tem software is operating normally and the software is loaded. Run the software is operating normally and the software is loaded. Run the
Ethernet loopback Utility (TEST 90) to check the networking capability Ethernet loopback Utility (TEST 90) to check the networking capability
of the system if the Ethernet boot continues to fail. of the system if the Ethernet boot continues to fail.
@@ -129,8 +129,8 @@ operating system software at the address contained in the program counter
(PC). This command starts up the operating software where it was halted (PC). This command starts up the operating software where it was halted
provided no console test commands were run. Running a test command provided no console test commands were run. Running a test command
alters the PC and memory so that the operating system software cannot alters the PC and memory so that the operating system software cannot
be started properly by entering the continue command. If a test com- be started properly by entering the continue command. If a test command
mand was entered, use the boot command to start the operating system was entered, use the boot command to start the operating system
software. The continue command is similar to the start command. The software. The continue command is similar to the start command. The
start command can specify the address to Start the operating software start command can specify the address to Start the operating software
and the continue command has the operating software continue where and the continue command has the operating software continue where
@@ -184,8 +184,8 @@ console terminal. See \hyperlink{appendix.a}{Appendix A} for a complete listing
Power-up tests run each time the system power is turned on. Power-up Power-up tests run each time the system power is turned on. Power-up
testing consists of a sequence of tests executed for each device installed in testing consists of a sequence of tests executed for each device installed in
the system. The test number of each device is listed on the power-up screen the system. The test number of each device is listed on the power-up screen
display as the device is tested. \figref{2-1} shows an example of the power- display as the device is tested. \figref{2-1} shows an example of the powerup
up screen display. The first line indicates the CPU name (KA410-A) and the screen display. The first line indicates the CPU name (KA410-A) and the
ROM version (V1.0). The test numbers are listed next in descending order ROM version (V1.0). The test numbers are listed next in descending order
from the first test, F, to the final test, 1. TEST F will have an underscore from the first test, F, to the final test, 1. TEST F will have an underscore
after it on the MicroVAX 2000 to indicate that TEST F was not run. Note in after it on the MicroVAX 2000 to indicate that TEST F was not run. Note in
@@ -199,7 +199,7 @@ installed, but its ROM is destroyed and the Option device must be replaced.
Only TESTS 1 through 4 can have an asterisk after them. \figref{2-2} lists Only TESTS 1 through 4 can have an asterisk after them. \figref{2-2} lists
the symbols that can appear in between the tests and what they indicate. the symbols that can appear in between the tests and what they indicate.
\begin{ttfig}{2-1}{Example of Power-up Tests Screen Display} \begin{ttfig}{Example of Power-up Tests Screen Display}
KA410-A V1.0 KA410-A V1.0
F...E...D...C...B...A...9...8...7...6...5...4_..3_..2_..1_.. F...E...D...C...B...A...9...8...7...6...5...4_..3_..2_..1_..
\end{ttfig} \end{ttfig}
@@ -207,7 +207,7 @@ F...E...D...C...B...A...9...8...7...6...5...4_..3_..2_..1_..
\figref{2-2} lists the definitions of the symbols that appear between the test \figref{2-2} lists the definitions of the symbols that appear between the test
numbers in the power-up test countdown. numbers in the power-up test countdown.
\begin{ttfig}{2-2}{Power-up Symbols Defined} \begin{ttfig}{Power-up Symbols Defined}
... Device tested successfully or has a soft error ... Device tested successfully or has a soft error
?.. Device has a hard error ?.. Device has a hard error
_.. Device not installed or not tested _.. Device not installed or not tested
@@ -236,13 +236,13 @@ table are updated every time self-test is run. See Paragraph 2.5.1 for an
explanation of how to use the configuration table. explanation of how to use the configuration table.
Each error summary consists of one or two question marks, a test number, Each error summary consists of one or two question marks, a test number,
the ID number of the failed device, and an eight-digit error code. For ex- the ID number of the failed device, and an eight-digit error code. For example,
ample, in \figref{2-3}, the first line of the error summary shows a hard error in \figref{2-3}, the first line of the error summary shows a hard error
for TEST F, a device ID number of 00B0, and an error code of 0001.F002. for TEST F, a device ID number of 00B0, and an error code of 0001.F002.
The second line shows a soft error for TEST E, a device ID of 0040, and an The second line shows a soft error for TEST E, a device ID of 0040, and an
error code of 0000.0005. \hyperlink{subsubsection.2.3.1.1}{Section 2.3.1.1} describes the error codes. error code of 0000.0005. \hyperlink{subsubsection.2.3.1.1}{Section 2.3.1.1} describes the error codes.
\newpage \newpage
\begin{ttfig}{2-3}{Example of Power-up Tests Screen Display with Errors.} \begin{ttfig}{Example of Power-up Tests Screen Display with Errors.}
KA410-A V1.0 KA410-A V1.0
F?..E...0...C...B...A...9...8...7...6...5...4_..3_..2_..1_.. F?..E...0...C...B...A...9...8...7...6...5...4_..3_..2_..1_..
@@ -257,7 +257,7 @@ this happens, the only way to determine the cause of the problem is by
viewing the LEDs on the keyboard. One of the LEDs will be lit to indicate viewing the LEDs on the keyboard. One of the LEDs will be lit to indicate
the failing module. \tabref{2-2} lists the LEDs and which module has failed. the failing module. \tabref{2-2} lists the LEDs and which module has failed.
\begin{tbl}{2-2}{Keyboard LEDs Defined}{l l} \begin{tbl}{Keyboard LEDs Defined}{l l}
\textbf{Keyboard LED} & \textbf{Failing module}\\ \textbf{Keyboard LED} & \textbf{Failing module}\\
\hline \hline
Hold Screen & System module \\ Hold Screen & System module \\
@@ -299,7 +299,7 @@ of the configuration table and for an explanation of the configuration table,
see \hyperlink{subsection.2.5.1}{Paragraph 2.5.1}. see \hyperlink{subsection.2.5.1}{Paragraph 2.5.1}.
\begin{ttfig}{2-4}{Example of the Configuration Table} \begin{ttfig}{Example of the Configuration Table}
>>> TEST 50 >>> TEST 50
KA410-A V1.0 KA410-A V1.0
@@ -355,7 +355,7 @@ tested. \tabref{2-3} lists the test numbers and the devices tested by those
numbers. \figref{2-5} shows an example of running self-test successfully on numbers. \figref{2-5} shows an example of running self-test successfully on
the disk controller. the disk controller.
\begin{ttfig}{2-5}{Example of Running Self-test on the Disk Controller} \begin{ttfig}{Example of Running Self-test on the Disk Controller}
>>> TEST 7 >>> TEST 7
7... 7...
>>> >>>
@@ -370,7 +370,7 @@ all tests between C and 4 are tested successfully. Note that you cannot
pick and choose which devices to test between C and 4, all tests between pick and choose which devices to test between C and 4, all tests between
C and 4 are tested when entered as a group. C and 4 are tested when entered as a group.
\begin{ttfig}{2-6}{Example of Running a Series of Self-tests} \begin{ttfig}{Example of Running a Series of Self-tests}
>>> TEST C 4 >>> TEST C 4
C...B...A...9...8...7...6...5...4_.. C...B...A...9...8...7...6...5...4_..
>>> >>>
@@ -379,7 +379,7 @@ C and 4 are tested when entered as a group.
To test all devices, enter TEST F 1. The MicroVAX 2000 skips over the To test all devices, enter TEST F 1. The MicroVAX 2000 skips over the
MONO video test (TEST F) since it does not use the video circuits. MONO video test (TEST F) since it does not use the video circuits.
\begin{tbl}{2-3}{Self-test Commands}{p{2cm} p{8cm}} \begin{tbl}{Self-test Commands}{p{2cm} p{8cm}}
\raggedright\textbf{Test\newline Number} & \textbf{Device\newline Tested} \\ \raggedright\textbf{Test\newline Number} & \textbf{Device\newline Tested} \\
\hline \hline
1 & Option module (Network Interconnect module) (NI) \\[0.5em] 1 & Option module (Network Interconnect module) (NI) \\[0.5em]
@@ -437,7 +437,7 @@ tests and not the results of the system exerciser. See Paragraph 2 5 1 for an
explanation of the configuration table. explanation of the configuration table.
\newpage \newpage
\begin{ttfig}{2-7}{Example of a Self-test Error on the Disk Controller} \begin{ttfig}{Example of a Self-test Error on the Disk Controller}
>>> TEST 7 >>> TEST 7
7?.. 7?..
84 FAIL 84 FAIL
@@ -468,8 +468,8 @@ This type of testing usually finds any intermittent failures.
The system exerciser has two modes: customer mode and field service The system exerciser has two modes: customer mode and field service
mode. Customer mode system exerciser (TEST 0) does not use loopback mode. Customer mode system exerciser (TEST 0) does not use loopback
connectors and does not fully test all of the devices. Field service mode sys- connectors and does not fully test all of the devices. Field service mode system
tem exerciser requires loopback connectors installed and removable media exerciser requires loopback connectors installed and removable media
from the maintenance kit inserted and loaded. You must initialize the floppy from the maintenance kit inserted and loaded. You must initialize the floppy
diskette in the maintenance kit with a special diagnostic key so the exerciser diskette in the maintenance kit with a special diagnostic key so the exerciser
can perform write tests on the RX33. Refer to Paragraph 2.5.11 for more can perform write tests on the RX33. Refer to Paragraph 2.5.11 for more
@@ -495,7 +495,7 @@ configuration.
\subsubsection{System Exerciser Diagnostic Commands} \subsubsection{System Exerciser Diagnostic Commands}
\tabref{2-4} lists the system exerciser diagnostic commands. \tabref{2-4} lists the system exerciser diagnostic commands.
\begin{tbl}{2-4}{System Exerciser Diagnostic Commands}{p{0.2\textwidth} p{0.8\textwidth}} \begin{tbl}{System Exerciser Diagnostic Commands}{p{0.2\textwidth} p{0.8\textwidth}}
\textbf{Test Commands} & \textbf{Description of Commands} \\ \textbf{Test Commands} & \textbf{Description of Commands} \\
\hline \hline
@@ -564,7 +564,7 @@ installed, the system tests those devices the same as in customer mode.
the system exerciser in field service mode. Customer mode gives the same the system exerciser in field service mode. Customer mode gives the same
display, but with a CU in place of the FS on the top of the display. display, but with a CU in place of the FS on the top of the display.
\begin{ttfig}{2-8}{System Exerciser Display Example} \begin{ttfig}{System Exerciser Display Example}
KA410-A V1.0 01 FS KA410-A V1.0 01 FS
F 00B0 MONO 0000.0001 2 0 00:00:55.01 F 00B0 MONO 0000.0001 2 0 00:00:55.01
@@ -663,11 +663,11 @@ service mode. Both modes test the NVR circuits the same.
To run self-test, enter TEST D. Any error code other than 0000.0001 in To run self-test, enter TEST D. Any error code other than 0000.0001 in
dicates a fault in the NVR. An error code of 0000.0005 indicates that the dicates a fault in the NVR. An error code of 0000.0005 indicates that the
battery charge is below the normal voltage level. If the battery is low, al- battery charge is below the normal voltage level. If the battery is low, allow
low the system to charge the battery for five minutes and then run TEST D the system to charge the battery for five minutes and then run TEST D
again. If the error code is still 0000.0005, replace the battery. A charging again. If the error code is still 0000.0005, replace the battery. A charging
time of 20-25 hours is needed to fully charge the battery. Leaving the sys- time of 20-25 hours is needed to fully charge the battery. Leaving the system
tem powered up charges the battery. If any other error code appears in the powered up charges the battery. If any other error code appears in the
CLK error display, you must replace the system module. CLK error display, you must replace the system module.
The system exerciser does not display the status of the NVR circuits. The The system exerciser does not display the status of the NVR circuits. The
@@ -693,8 +693,8 @@ code other than 0000.4001 indicates a fault in the DZ controller.
\textbf{VAXstation 2000} \textbf{VAXstation 2000}
To run self-test in field service mode on VAXstation 2000, install a loopback To run self-test in field service mode on VAXstation 2000, install a loopback
(p/n 29-24795) on the 25-pin communication port and a loopback (p/n 29- (p/n 29-24795) on the 25-pin communication port and a loopback (p/n 29-24794)
24794) on the 9-pin printer port. Enter TEST C. If the error code is not on the 9-pin printer port. Enter TEST C. If the error code is not
0000.0001, check to see if the loopbacks are still connected. Reconnect 0000.0001, check to see if the loopbacks are still connected. Reconnect
them, if necessary, and test again. Replace the system module if the error them, if necessary, and test again. Replace the system module if the error
still exists. Loopbacks cannot be used to test the DZ controller when the still exists. Loopbacks cannot be used to test the DZ controller when the
@@ -768,7 +768,7 @@ error code indicates. The status portion of the code indicates the number
of pages tested during the last test pass (1 page = 512 bytes) if there were of pages tested during the last test pass (1 page = 512 bytes) if there were
no errors found. no errors found.
\newpage \newpage
\begin{ttfig}{2-9}{Example of MEM System Exerciser Error Code} \begin{ttfig}{Example of MEM System Exerciser Error Code}
. .
. .
. .
@@ -788,7 +788,7 @@ the last test pass, the error portion of the code contains the error code.
\tabref{2-5} lists the MEM system exerciser errors and shows which module \tabref{2-5} lists the MEM system exerciser errors and shows which module
is causing the error. is causing the error.
\begin{tbl}{2-5}{MEM System Exerciser Error Codes}{l l} \begin{tbl}{MEM System Exerciser Error Codes}{l l}
\textbf{Error Codes} & \textbf{Definition}\\ \textbf{Error Codes} & \textbf{Definition}\\
\hline \hline
0001.001F & Compare error on the system module\\ 0001.001F & Compare error on the system module\\
@@ -847,14 +847,14 @@ The system exerciser does not exercise the IT circuits.
You can troubleshoot the disk controller and drives using self-test and the You can troubleshoot the disk controller and drives using self-test and the
system exerciser. These diagnostics test the disk controller on the system system exerciser. These diagnostics test the disk controller on the system
module and also test the drives connected to the controller. There is a max- module and also test the drives connected to the controller. There is a maximum
imum number of three drives that can be supported in either a VAXstation number of three drives that can be supported in either a VAXstation
2000 or a MicroVAX 2000. The three drives are labelled DUA0, DUA1, and 2000 or a MicroVAX 2000. The three drives are labelled DUA0, DUA1, and
DUA2. DUA0 will always be the hard disk drive (RD) located in the system DUA2. DUA0 will always be the hard disk drive (RD) located in the system
box. DUA0 can be a full-height or a half-height drive. DUA1 will always be box. DUA0 can be a full-height or a half-height drive. DUA1 will always be
the hard disk drive (RD) located in the expansion box. DUAI communicates the hard disk drive (RD) located in the expansion box. DUAI communicates
to the system module through port B on the expansion adapter; thus allow- to the system module through port B on the expansion adapter; thus allowing
ing you to isolate DUA1 during testing, if necessary, without opening the you to isolate DUA1 during testing, if necessary, without opening the
system box. DUA2 will always be the half-height floppy disk drive (RX33) system box. DUA2 will always be the half-height floppy disk drive (RX33)
and will only be located in the system box. If DUA0 is a full-height drive, and will only be located in the system box. If DUA0 is a full-height drive,
then a floppy disk drive cannot be installed because of lack of space in the then a floppy disk drive cannot be installed because of lack of space in the
@@ -873,7 +873,7 @@ broken into five segments: status of DUA2, DUA1, DUA0, tape controller,
and the error code if a hard error is found. The power-up error code is the and the error code if a hard error is found. The power-up error code is the
same as the self-test error code. same as the self-test error code.
\begin{ttfig}{2-10}{HDC Power-up and Self-test Error Code} \begin{ttfig}{HDC Power-up and Self-test Error Code}
7 0090 0000.0000 7 0090 0000.0000
|||| | | |||| | |
|||| `--' |||| `--'
@@ -903,7 +903,7 @@ digits of the error code repeat the first four digits if a hard error is found o
the disk controller. Otherwise, the last four digits contain 0001 to indicate the disk controller. Otherwise, the last four digits contain 0001 to indicate
no errors or soft errors. no errors or soft errors.
\begin{tbl}{2-6}{Power-up and Self-test Error Codes for each Dlsk Drive}{p{0.2\textwidth} p{0.75\textwidth}} \begin{tbl}{Power-up and Self-test Error Codes for each Dlsk Drive}{p{0.2\textwidth} p{0.75\textwidth}}
\textbf{Error Codes} & \textbf{Description of error codes for each disk drive}\\ \textbf{Error Codes} & \textbf{Description of error codes for each disk drive}\\
\hline \hline
1 & Good -- No error for this drive.\\ 1 & Good -- No error for this drive.\\
@@ -983,7 +983,7 @@ or an error in the controller. You must replace one or both to fix the error.
Two question marks for DUA2 may also indicate bad media on the floppy Two question marks for DUA2 may also indicate bad media on the floppy
diskette. diskette.
\begin{ttfig}{2-11}{Example of System Exerciser Display for the Disk Controller} \begin{ttfig}{Example of System Exerciser Display for the Disk Controller}
. .
. .
. .
@@ -999,7 +999,7 @@ diskette.
\tabref{2-7} lists the erorr codes for the disk controller's line and \tabref{2-8} \tabref{2-7} lists the erorr codes for the disk controller's line and \tabref{2-8}
lists the error codes for the drives. lists the error codes for the drives.
\begin{tbl}{2-7}{HDC Disk Controller System Exerciser Error Codes}{p{0.1\textwidth} p{0.3\textwidth} p{0.5\textwidth}} \begin{tbl}{HDC Disk Controller System Exerciser Error Codes}{p{0.1\textwidth} p{0.3\textwidth} p{0.5\textwidth}}
\textbf{Error Codes} & \textbf{Possible Cause} & \textbf{Corrective Action}\\ \textbf{Error Codes} & \textbf{Possible Cause} & \textbf{Corrective Action}\\
\hline \hline
@@ -1028,7 +1028,7 @@ X000.0001 & The X indicates the drive used for the data transfer test &
\end{tbl} \end{tbl}
\begin{tbl}{2-8}{HDC Dlsk Drive System Exerciser Error Codes}{p{0.1\textwidth} p{0.25\textwidth} p{0.55\textwidth}} \begin{tbl}{HDC Dlsk Drive System Exerciser Error Codes}{p{0.1\textwidth} p{0.25\textwidth} p{0.55\textwidth}}
\textbf{Error Codes} & \textbf{Possible Cause} & \textbf{Corrective Action}\\ \textbf{Error Codes} & \textbf{Possible Cause} & \textbf{Corrective Action}\\
\hline \hline
@@ -1108,10 +1108,10 @@ the expansion box.
DUA2 -- Refer to \figref{2-14} to set the drive select jumper on an RX33 in DUA2 -- Refer to \figref{2-14} to set the drive select jumper on an RX33 in
the system box. the system box.
\fig[0.6]{2-12}{MA-0131-87}{RD32 Drive Select Jumper Setting for DUA0} \fig[0.6]{MA-0131-87}{RD32 Drive Select Jumper Setting for DUA0}
\fig[0.6]{2-13}{SHR-0126-85}{RD53 Drive Select Jumper Setting for DUA0 and DUA1} \fig[0.6]{SHR-0126-85}{RD53 Drive Select Jumper Setting for DUA0 and DUA1}
\fig[0.7]{2-14}{SHR-0045-86}{RX33 Drive Select Jumper Setting for DUA2} \fig[0.7]{SHR-0045-86}{RX33 Drive Select Jumper Setting for DUA2}
\subsection{TPC -- Tape Drive Controller Troubleshooting Procedures} \subsection{TPC -- Tape Drive Controller Troubleshooting Procedures}
@@ -1142,7 +1142,7 @@ into five segments: ID addresses of devices connected to the tape port,
ID addresses of the devices that tested successfully, two possible cause ID addresses of the devices that tested successfully, two possible cause
indicators, and a status of the tape controller. indicators, and a status of the tape controller.
\begin{ttfig}{2-15}{TPC Power-up and Self-test Error Code} \begin{ttfig}{TPC Power-up and Self-test Error Code}
6 00A0 0000.0000 6 00A0 0000.0000
|||| |||| |||| ||||
`|`| ||`| `|`| ||`|
@@ -1191,8 +1191,8 @@ does not recognize it or it is not powered up.
If the second two digits of the status code shown in \figref{2-15} (good If the second two digits of the status code shown in \figref{2-15} (good
devices) do not match the first two digits (connected devices), then there devices) do not match the first two digits (connected devices), then there
is a communication problem between the tape expansion box and the sys- is a communication problem between the tape expansion box and the system.
tem. Disconnect the cable from port A on the expansion adapter and run Disconnect the cable from port A on the expansion adapter and run
self-test again. If the status code for TPC now contains anything other than self-test again. If the status code for TPC now contains anything other than
0000.4001, replace the system module. Otherwise, if the status code is 0000.4001, replace the system module. Otherwise, if the status code is
0000.4001, reconnect the cable to port A and make sure the tape expan 0000.4001, reconnect the cable to port A and make sure the tape expan
@@ -1230,8 +1230,8 @@ pass test of the TPC does not perform any diagnostics or data transfer tests
on the tape expansion box. The first pass test only checks whether or not the on the tape expansion box. The first pass test only checks whether or not the
tape expansion box is there and whether or not it can communicate over the tape expansion box is there and whether or not it can communicate over the
tape port to the tape controller. Complete data transfer and read/write (field tape port to the tape controller. Complete data transfer and read/write (field
Service mode only) testing is done on subsequent test passes. For exam- Service mode only) testing is done on subsequent test passes. For example,
ple, in field Service mode with the Special keyed COMPACTape cartridge in field Service mode with the Special keyed COMPACTape cartridge
installed, the error code for the tape expansion box shows that the TK50 is installed, the error code for the tape expansion box shows that the TK50 is
not writeable (1100.0001) during the first pass. However, the second pass not writeable (1100.0001) during the first pass. However, the second pass
shows that the TK50 is writeable (1300.0001) as long as the cartridge has a shows that the TK50 is writeable (1300.0001) as long as the cartridge has a
@@ -1265,7 +1265,7 @@ and the system module must be replaced. Otherwise, the error is in the
expansion box and you must run the internal self-test on the expansion box expansion box and you must run the internal self-test on the expansion box
as described below. as described below.
\begin{ttfig}{2-16}{Example of System Exerciser Display for the Tape Controller} \begin{ttfig}{Example of System Exerciser Display for the Tape Controller}
. .
. .
. .
@@ -1282,7 +1282,7 @@ as described below.
and \tabref{2-10} lists the system exerciser error codes for the tape drives error and \tabref{2-10} lists the system exerciser error codes for the tape drives error
line. line.
\begin{tbl}{2-9}{TPC Tape Controller System Exerciser Error Codes}{p{0.2\textwidth} p{0.2\textwidth} p{0.5\textwidth}} \begin{tbl}{TPC Tape Controller System Exerciser Error Codes}{p{0.2\textwidth} p{0.2\textwidth} p{0.5\textwidth}}
\textbf{Error Codes} & \textbf{Possible Cause} & \textbf{Corrective Action}\\ \textbf{Error Codes} & \textbf{Possible Cause} & \textbf{Corrective Action}\\
\hline \hline
@@ -1313,3 +1313,324 @@ X000.0001 & This error code indicates no Controller error. The X indicates
\end{tbl} \end{tbl}
\begin{tbl}{Tape Drive Expansion Box System Exerciser Error Codes}{p{0.2\textwidth} p{0.2\textwidth} p{0.5\textwidth}}
\textbf{Error Codes} & \textbf{Possible Cause} & \textbf{Corrective Action}\\
\hline
X000.0001 & The X indicates the device ID address of tape expansion box. &
This device ID address can be 1, 2, 3, 4, 5, 6, or 7. It should normally be 1 unless the device ID address
jumpers (Pl, P2, P3) on the TZK50 controller board have been changed. It must never be 0. If a 0 is in
this position, the device ID address jumpers are set to zero and they must be reset to another ID. The
ID address must be 1 for systems running VMS or ULTRIX.
\\
0X00.0001 & The X indicates the tape cartridge status. &
The X position indicates whether or not the device on the tape port has removeable or non-removeable
media and also whether or not the device is writeable. 1 = removeable media, 2 = writeable, and 3
= removeable media and it is writeable. This digit should be a 1 or a 3 since the TK50 has removeable
media. This digit should be a 1 in customer mode and a 3 in field Service mode if the special-keyed
cartridge is installed and loaded in the TK50. Note that this digit can never be a 3 in field Service mode
until a second pass test is done on the TPC since the system exerciser does not do a write test on the first
pass.
\\
00XX.0001 & The XX indicates the drive error count during the data transfer test. 00 indicates no error. &
The error may be in the TZK50 controller board, the TK50 tape drive, or the tape controller on the
system module. Run the exerciser again but with another tape expansion box, if possible, to determine
if the error is on the tape controller or in the tape expansion box you removed. If the data
transfer error still appears after replacing the tape expansion box, replace the system module.
Otherwise, troubleshoot the tape expansion box as shown in \hyperlink{subsubsection.2.4.10.3}{Paragraph 2.4.10.3}
below. If you do not have an other tape expansion box to swap out, replace the following FRUs one at a time
and run the exerciser after each one is replaced until there are no more transfer errors. First, TZK50
controller board; second, TK50 tape drive; third, the system module. Remember that the TK50 tape drive is not
tested in customer mode and is also not tested in field service mode if the special-keyed tape cartridge is not
loaded in the TK50 tape drive.
\\
\end{tbl}
\begin{tblcont}{Tape Drive Expansion Box System Exerciser Error Codes}{p{0.2\textwidth} p{0.2\textwidth} p{0.5\textwidth}}
\textbf{Error Codes} & \textbf{Possible Cause} & \textbf{Corrective Action}\\
\hline
0000.XXX1 & The XXX indicates the error codes. 000 indicates no errors. &
If anything other than zeros (.0001) appear, Run the exerdser again but with another tape expansion
box, if possible, to determine if the error is on the tape controller or in the tape expansion box you
removed. If the error still appears after replacing the tape expansion box, replace the system module.
Otherwise, troubleshoot tne tape expansion box as shown in \hyperlink{subsubsection.2.4.10.3}{Paragraph 2.4.10.3}
below. If you do not have another tape expansion box to swap out, replace the following FRUs one at a time and run the
exerciser after each one is replaced until there are no more transfer errors. First, TZK50 controller
board; second, TK50 tape drive; third, the system module. Remember that the TK50 tape drive is not
tested in customer mode and is also not tested in field service mode if the special-keyed tape cartridge
is not loaded in the TK50 tape drive.
\\
\end{tblcont}
\subsubsection{Troubleshooting the Tape Expansion Box}
If the results for the TPC indicate a problem in the tape expansion box, the
problem could be the TK50 tape drive, the TZK50 controller board, or the
power supply. The TK50 tape drive performs an internal self-test every time
the tape expansion box is powered up. The TZK50 controller also performs
an internal self-test at power up. To do an in-depth self-test on the TK50
tape drive and the TZK50 controller board, follow the procedure below. Do
each step indicated until you find and fix the problem.
\begin{enumerate}
\item Remove the tape drive expansion box cover.
\item Check all cables to make sure they are connected properly. Remove the
shield to check the cables on the back of the drive. Note that there are
two power cables connected to the resistor load board.
\item Check the jumpers on the TZK50 controller board for proper installation.
Refer to \figref{2-17} for jumper locations and tape port ID address
confirmation. \figref{2-17} shows the controller board set for ID
address 1, with parity checking enabled, and internal diagnostics disabled.
Make sure the three ID address jumpers (Pl, P2, and P3) are set
to ID address 1. Jumper P4 is the parity checking jumper and must be
installed for normal operation. Jumper P5 is the diagnostic jumper and
must not be installed for normal operation. Note the position of the
spare jumper(s). Spare jumpers should be stored across P5 and one of
the spare posts.
\item Check the three resistor network packs (Z7, Z6, and Z5) to make sure
they are installed properly. If this expansion box is the only box
connected to the tape port, these resistor network packs must be installed
on this board. If this expansion box is not the only box connected to the
tape port, then make sure the last box in the chain contains these
resistor network packs and all other boxes in the chain have their resistor
network packs removed.
\item Plug in the power cord and switch on power to the expansion box.
\item If the LED on the TZK50 controller board and on the TK50 tape drive
do not light when power is first turned on or the fan does not turn,
troubleshoot the power supply (\hyperlink{subsection.2.4.13}{Paragraph 2.4.13}).
\item Watch the red light on the TK50 tape drive. It should shut off after five
to six seconds after power up if no tape is installed. If it starts flashing,
replace the TK50 tape drive. When a tape is installed, the red light stays
lit.
\item Look at the LED on the TZK50 controller board. It turns on at power
up, then turns off after two seconds. It must stay off once it turns off.
If it does not stay off, replace the TZK50 controller board.
\item Insert and load a blank COMPACTape cartridge into the TK50 tape
drive. Do not use the special-keyed cartridge from the kit or a cartridge
that has good data, because the next few steps will erase the special
key and the data on the cartridge. If you must use the special-keyed
cartridge, reload the special key onto the cartridge using TEST 73 after
you complete this procedure.
\item Switch off power to the expansion box.
\item Remove a spare jumper and install it onto P5. If there are two spare
jumpers then both must be removed from their storage positions so one
of them can be installed onto P5.
\item Switch on the power switch.
\item Wait about one minute for the test to finish. If the LED on the TZK50
controller board starts flashing during or at the end of the test, replace
the TK50 tape drive. If the LED is on steady, replace the TZK50 Con
troller board. If the LED is off, the TZK50 controller board and the TK50
tape drive are operating properly. Note that the LED comes on again
at the end of the test for about two seconds to indicate that the testing
cycle has completed and is starting over again. The test will continue
to cycle until the P5 diagnostic jumper is removed or power is switched
off.
\newpage
\fig{MA-0158-87}{TZK50 Controller Board Jumper Locations}
\newpage
\item Replace the faulty component, if any, and retest.
\item Set up the jumpers on the TZK50 controller board for normal operation.
Spare jumpers must be stored across P5 and one of the spare posts.
\item This concludes the troubleshooting procedures for the tape expansion
box.
\end{enumerate}
\subsection{SYS -- Interrupt Controller and ThinWire Ethernet ID ROM Troubleshooting Procedures}
You can troubleshoot the interrupt controller and ThinWire Ethernet ID
ROM (SYS) in either customer mode or field service mode. Both modes
test these circuits the same.
\subsubsection{Self-test}
To run self-test, enter TEST 5. Any error code other than 0000.0001 or
0000.0100 indicates a fault in the interrupt Controller or the ThinWire Ether
net ID ROM on the system module. The 0000.0100 error code indicates that
the keyboard is disconnected from the VAXstation 2000 systems. Replace
just the ThinWire Ethernet ID ROM on the system module to fix an error
code of 0000.0004. Replace the system module to fix any other error code.
The replacement procedure for the system module instructs you to remove
the Thinwire Ethernet ID ROM from the system module being removed and
install it onto the new system module. If the ThinWire Ethernet ID ROM
has been replaced for an error code of 0000.0004 and the same error code
of 0000.0004 reappears when you retest, replace the system module instead
of just the ThinWire Ethernet ID ROM.
The system exerciser does not display the status of the SYS circuits. The
SYS circuits are not directly tested but are tested through the testing of other
circuits.
\newpage
\subsection{NI -- ThinWire Ethernet Network Option Troubleshooting Procedures}
You can troubleshoot the ThinWire Ethernet network option (NI) in either
customer mode or field service mode. Both modes of self-test test the network
option the same. The field service mode of the system exerciser does
a more in-depth testing of the option. To troubleshoot the network option,
run self-test (TEST 1) or run the system exerciser (TEST 0 for customer mode
or TEST 101 for field service mode).
Self-test and the system exerciser test the network interconnect module,
the ThinWire transceiver circuits on the system module, and also perform
a loopback function on the ThinWire cable. All tests fail with an error
code of 0000.7004 if the ThinWire cable is not connected to the back of the
System box. An error code of 0000.7008 indicates the ThinWire cable is
not terminated properly. Check the ThinWire cable first if any error code
has a number seven in the fifth position (0000.7000). The seven in the fifth
Position indicates a loopback error, but it does not exclude a problem on the
network option inside the system box. An error code of 0000.0001 indicates
no error and the network option is operational.
\subsubsection{Self-test}
To run self-test, enter TEST 1. Any error code other than 0000.0001 indicates
a fault in either the network interconnect module or on the ThinWire
Ethernet cable. Note that positions 3 and 4 (00XX.0001) in the error code
indicate the number of retries over the Ethernet cable before a success. If
the error code is not 0000.0001, check the ThinWire Ethernet cable on the
back of the system for proper connections and terminators. Reconnect the
Thinwire cable and terminators, if disconnected, and test again. If the error
code is 0000.7000 or above (for example, 0000.7001 or higher), disconnect
the ThinWire T connector from the back of the system and install the T con
nector with terminators from the service kit. Run the test again. If the error
code is 0000.0001 after installing the T connector with both terminators, the
problem is on the ThinWire Ethernet cable. Otherwise, if the error code
is anything other than 0000.0001, replace the network interconnect module
and test again with the T connector and both terminators installed. If the
error code is still not 0000.0001 after repladng the network interconnect
module, replace the system module.
\subsubsection{System Exerciser}
To run the system exerciser, enter TEST 0 for customer mode or TEST 101
for field service mode. Field service mode does a more in-depth test of
the circuits. Any error code other than 0000.0001 indicates a fault in the
network interconnect module or on the system module. Unlike the self-test
for the network Option, the system exerciser does not do any testing over
the ThinWire Ethernet cable. It only tests the internal circuitry. If the error
code is not 0000.0001, replace the network interconnect module. If the error
code is still not 0000.0001 after replacing the network interconnect module,
replace the system module.
\subsection{Power Supply Troubleshooting Procedures}
Follow the flowchart in \figref{2-18} if a problem with the power supply in
either the system box, hard disk expansion box, or tape drive expansion
box exists. The flowchart is designed to troubleshoot the power supply in
any of the three boxes.
\fig[0.6]{MA-0066-87}{Flowchart for Troubleshooting the Power Supply}
\fig{MA-0156-87}{Power Connectors Pin Voltages}
\newpage
\subsection{VR260 Monochrome Monitor Troubleshooting Procedures}
\tabref{2-11} lists some Symptoms of common problems with the VR260.
When troubleshooting the VR260, follow the suggested corrective actions
in the order listed.
\begin{tbl}{VR260 Troubleshooting Table}{p{0.3\textwidth} p{0.6\textwidth}}
\textbf{Symptom} & \textbf{Corrective Action} \\
\hline
No LED; blank screen. &
Check the power cord connection.
\vspace*{0.8em}
Check the 120/240 Vac setting.
\vspace*{0.8em}
Check the fuse.
\vspace*{0.8em}
Remove the rear bulkhead assembly and check the connection to the transformer assembly.
\vspace*{0.8em}
Check the deflection board connections.
\vspace*{0.8em}
Replace the deflection board connections.
\\
Flashing LED. &
Check the deflection board connections, including the chassis ground.
\vspace*{0.8em}
Make sure the high-voltage anode lead has a good connection with the CRT.
\vspace*{0.8em}
Replace the deflection board.
\\
Compressed raster; no video display. &
Make sure the monitor cable is connected between the system and the monitor.
\vspace*{0.8em}
Adjust the contrast and brightness adjustments.
\vspace*{0.8em}
Run the monochrome video diagnostics (TEST F). If a failure is indicated,
replace the System module in the system box before proceeding with troubleshooting the VR260.
\vspace*{0.8em}
Remove the rear bulkhead assembly and check the cable connections to the video amp board.
\vspace*{0.8em}
Remove the video amp board and check the CRT pin connections.
\vspace*{0.8em}
Replace the video amp board.
\\
Raster; no video display. &
Run the monochrome video diagnostics (TEST F). If a failure
is indicated, replace the system module in the System
box before proceeding with troubleshooting the VR260.
\vspace*{0.8em}
Ensure good CRT connections.
\vspace*{0.8em}
Replace the video amp board.
\\
\end{tbl}
\begin{tblcont}{VR260 Troubleshooting Table}{p{0.3\textwidth} p{0.6\textwidth}}
\textbf{Symptom} & \textbf{Corrective Action} \\
\hline
No LED but good video display. &
Remove the LED bezel assembly and check for a good connection.
\vspace*{0.8em}
Replace the LED.
\vspace*{0.8em}
Ensure proper cable connections fr.om.the deflection board
to the LED bezel assembly.
\\
Video display but not to specifications. &
Bring up the appropriate monochrome display alignment
pattern (TESTS 60, 61, or 62) and perform the adjustment
according to \hyperlink{chapter.4}{Chapter 4}.
\\
\end{tblcont}

BIN
EK-VSTAA-MG-001.pdf
View File

Binary file not shown.

BIN
README.pdf
View File

Binary file not shown.

43
dec.cls
View File

@@ -20,10 +20,14 @@
\usepackage{enumitem} \usepackage{enumitem}
\usepackage{environ} \usepackage{environ}
\usepackage{caption} \usepackage{caption}
\usepackage{longtable}
\setlist{nosep} \setlist{nosep}
\setlist{parsep=0em, itemsep=0.5em,topsep=-0.8em} \setlist{parsep=0em, itemsep=0.5em,topsep=-0.8em}
\newcommand{\figlabel}{\arabic{figure}}
\newcommand{\tbllabel}{\arabic{figure}}
\hypersetup{ \hypersetup{
colorlinks, colorlinks,
@@ -209,13 +213,13 @@ required to take measures to correct the interference.
\titleformat{\subsubsection}{\raggedright\fontfamily{phv}\selectfont\bfseries}{}{0.0em}{}[] \titleformat{\subsubsection}{\raggedright\fontfamily{phv}\selectfont\bfseries}{}{0.0em}{}[]
\titlespacing{\subsubsection}{0em}{0em}{0em} \titlespacing{\subsubsection}{0em}{0em}{0em}
\newcommand{\fig}[4][1.0]{\begin{figure}[H] \newcommand{\fig}[3][1.0]{\begin{figure}[H]
\caption{#4} \caption{#3}
\begin{center} \begin{center}
\makebox[#1\textwidth][c]{\includegraphics[width=#1\textwidth]{fig/#3}} \makebox[#1\textwidth][c]{\includegraphics[width=#1\textwidth]{fig/#2}}
\end{center} \end{center}
\end{figure} \end{figure}
\label{figure:#2} \label{figure:\figlabel}
} }
\newcommand{\howtoorder}{% \newcommand{\howtoorder}{%
@@ -291,11 +295,11 @@ required to take measures to correct the interference.
\captionsetup{skip=0pt} \captionsetup{skip=0pt}
\captionsetup{font=Large} \captionsetup{font=Large}
\newenvironment{ttfig}[2]{% \newenvironment{ttfig}[1]{%
\VerbatimEnvironment \VerbatimEnvironment
\begin{figure}[H] \begin{figure}[H]
\caption{#2} \caption{#1}
\label{figure:#1} \label{figure:\figlabel}
\small \small
\fontfamily{lmtt}\selectfont\bfseries \fontfamily{lmtt}\selectfont\bfseries
\begin{Verbatim} \begin{Verbatim}
@@ -306,13 +310,14 @@ required to take measures to correct the interference.
\NewEnviron{tbl}[3]{
\NewEnviron{tbl}[2]{
\begin{table}[H] \begin{table}[H]
\label{table:#1} \label{table:tbllabel}
\captionsetup{font=Large} \captionsetup{font=Large}
\caption{#2} \caption{#1}
\small \small
\begin{tabularx}{\textwidth}{#3} \begin{tabularx}{\textwidth}{#2}
\hline \hline
\BODY \BODY
\hline \hline
@@ -320,6 +325,22 @@ required to take measures to correct the interference.
\end{table} \end{table}
} }
\NewEnviron{tblcont}[2]{
\begin{table}[H]
\addtocounter{table}{-1}
\renewcommand\thetable{\arabic{table} (Cont.)}
\captionsetup{font=Large}
\caption{#1}
\small
\begin{tabularx}{\textwidth}{#2}
\hline
\BODY
\hline
\end{tabularx}
\end{table}
}
\newcommand{\figref}[1]{\hyperref[figure:#1]{Figure #1}} \newcommand{\figref}[1]{\hyperref[figure:#1]{Figure #1}}
\newcommand{\tabref}[1]{\hyperref[table:#1]{Table #1}} \newcommand{\tabref}[1]{\hyperref[table:#1]{Table #1}}

36
decsectional.cls
View File

@@ -88,3 +88,39 @@ DIBOL & Rainbow & \\
} }
\renewcommand\thefigure{\thechapter-\arabic{figure}}
\renewcommand\thetable{\thechapter-\arabic{table}}
\RenewEnviron{tbl}[2]{
\begin{table}[H]
\label{table:\tbllabel}
\captionsetup{font=Large}
\caption{#1}
\small
\begin{tabularx}{\textwidth}{#2}
\hline
\BODY
\hline
\end{tabularx}
\end{table}
}
\RenewEnviron{tblcont}[2]{
\begin{table}[H]
\addtocounter{table}{-1}
\renewcommand\thetable{\thechapter-\arabic{table} (Cont.)}
\captionsetup{font=Large}
\caption[]{#1}
\small
\begin{tabularx}{\textwidth}{#2}
\hline
\BODY
\hline
\end{tabularx}
\end{table}
}
\renewcommand{\figlabel}{\thechapter-\arabic{figure}}
\renewcommand{\tbllabel}{\thechapter-\arabic{table}}

BIN
fig/MA-0066-87.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 216 KiB

BIN
fig/MA-0156-87.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 160 KiB

BIN
fig/MA-0158-87.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 296 KiB